Hot Water Static Jet Washer
Traditional hot high pressure cleaners are often mobile units, and need to be plugged in and connected to services each time the operators needs to use it. The operator then has access to settings including the detergent flow, temperature and pressure, and likely to abuse at least the amount of detergent used.
Common operator problems can include filling with contaminated fuel, or filling the wrong tanks. From a health and safety point of view the incoming mains flex can be laid in water, or the outgoing high pressure hoses can be trailed across the floor.
Standard Features
- Full frost protection and cabinet lagging
- Efficient M2 boiler system
- Double spiral M2 coil
- Automatic stop/start system
- High pressure chemical system
- Professional interpump with ceramic pistons
- Industrial 1450rpm 4 pole electric Nicolini Motor
- Flame failure and leak detection system
- 16lt fuel tank with low level sensor
- Burner control with flow switch and thermostat
- 24v low tension safety controls
- Mains power on lamp
| Type | Static |
| Chemical | High Pressure |
| Motor Specification | 3hp, 1450rpm |
| Pressure | 100bar/ 1500psi |
| Product Weight | 250kg |
| Power Supply | 240v |
| Shutdown System | Auto stop/start |
| Temperature | 0-100 |
| Water | Hot |
| Water Flow | 12 litres per minute |
Standard Features
- Full frost protection and cabinet lagging
- Efficient M2 boiler system
- Double spiral M2 coil
- Automatic stop/start system
- High pressure chemical system
- Professional interpump with ceramic pistons
- Industrial 1450rpm 4 pole electric Nicolini Motor
- Flame failure and leak detection system
- 16lt fuel tank with low level sensor
- Burner control with flow switch and thermostat
- 24v low tension safety controls
- Mains power on lamp
| Type | Static |
| Chemical | High Pressure |
| Motor Specification | 5.5hp, 1450rpm |
| Pressure | 150bar/ 2175psi |
| Product Weight | 240kg |
| Power Supply | 415v |
| Shutdown System | Auto stop/start |
| Temperature | 0-100 |
| Water | Hot |
| Water Flow | 15 litres per minute |
Standard Features
- Full frost protection and cabinet lagging
- Efficient M2 boiler system
- Double spiral M2 coil
- Automatic stop/start system
- High pressure chemical system
- Professional interpump with ceramic pistons
- Industrial 1450rpm 4 pole electric Nicolini Motor
- Flame failure and leak detection system
- 16lt fuel tank with low level sensor
- Burner control with flow switch and thermostat
- 24v low tension safety controls
- Mains power on lamp
| Type | Static |
| Chemical | High Pressure |
| Motor Specification | 7.5hp, 1450rpm |
| Pressure | 200bar/ 3000psi |
| Product Weight | 240kg |
| Power Supply | 415v |
| Shutdown System | Auto stop/start |
| Temperature | 0-100 |
| Water | Hot |
| Water Flow | 15 litres per minute |
Standard Features
- Full frost protection and cabinet lagging
- Efficient M2 boiler system
- Double spiral M2 coil
- Automatic stop/start system
- High pressure chemical system
- Professional interpump with ceramic pistons
- Industrial 1450rpm 4 pole electric Nicolini Motor
- Flame failure and leak detection system
- 16lt fuel tank with low level sensor
- Burner control with flow switch and thermostat
- 24v low tension safety controls
- Mains power on lamp
| Type | Static |
| Chemical | High Pressure |
| Motor Specification | 10hp, 1450rpm |
| Pressure | 200bar/ 3000psi |
| Product Weight | 270kg |
| Power Supply | 415v |
| Shutdown System | Auto stop/start |
| Temperature | 0-100 |
| Water | Hot |
| Water Flow | 21 litres per minute |
Click below to view our full product guide. (opens in a new window)
Morclean’s quality administration systems have been assured and approved to the standards and guidelines of BS EN ISO 9000:2015 for the sales, service and hire of industrial cleaning equipment.
Our registration no. is 94/121120 and our standards and guidelines are externally audited by CIS.
- Please note that many models described on this website are bespoke, and as such cannot always be accurately depicted.
- All photographs and illustrations displayed on this website are representative of model ranges or a model series only. Individual models and specifications may vary from those shown.
- Please contact us if you require clarification or individual specifications of any equipment. Morclean reserve the right to update and amend the specification of our equipment and accessories without notice and in the interest of the customer.
- Images or specifications must not be reproduced with express written consent from Morclean Ltd.
- Any prices quoted are subject to VAT @ SR. E &OE
