Modular Wash Bay PRO-S3
3000mm width by 4500mm depth wash area
Three modular base sections
Two 2.2m walls to minimise overspray
(optional third available)
Safe access via two galvanized anti-slip ramps
Make water savings with the WPP10 filtration system
Sustainable by Design – Affordable by Nature
KEY FEATURES
Moderate Size
The wash area of the WashPad PRO-S3 measures approximately 3000mm in width and 4500mm in depth, making it suitable when needing a more washing space.
Accessible Entry
Equipped with two galvanized anti-slip ramps as standard, ensuring safe and easy access for equipment. Additional ramps can be ordered.
Overspray Protection
Two-sided walls standing at 2200mm high walls to help minimize overspray during the cleaning operations. Third wall available
Efficient Waste Management
The wash bay floor pan channels dirty water and solids towards a rear collection tank with three dams that retain solids while allowing water to filter through.
Automated Filtration
A float switch-activated diaphragm pump transfers water to the WPP10 Filtration Tank, where contaminants are filtered out, and the water is lightly chlorinated for reuse.
ADVANTAGES
Environmental Compliance
The closed-loop system recycles water, preventing contaminated runoff and aiding compliance with environmental regulations.
Cost-Efficiency
Reduces water usage, leading to lower water bills and potential savings on discharge licenses.
Modular and Portable
Easy to transport, assemble, and disassemble, with a modular structure that allows for flexibility to meet customer applications.
Sustainability
Recycle 100% of the water used in the cleaning process with the WPP10 filtration tank.
The WashPad PRO-S3 Wash Bay is an ideal solution for businesses seeking an efficient, environmentally responsible system for cleaning construction equipment.
WASHPAD PRO-S3: TECHNICAL SPECIFICATIONS |
|
|---|---|
| Wash Area | 3000mm x 4500mm |
| Total Dimensions | 3585mm x 5750mm |
| Filtration Tank Dimensions | 2810mm x 740mm x 990mm(H) |
| Max Load Capacity | 5000Kg |
| Wall Height | 2200mm |
| Total Dry Weight | 17200Kg |
| Diaphragm Pump | 0.054kW – 17L/minute |
| Booster Pump | 0.37kW – 5 to 40L/minute |
| Filtering System | WPP10 |
Please note that many models described on this website are bespoke, and as such cannot always be accurately depicted.
All photographs and illustrations displayed on this website are representative of model ranges or a model series only. Individual models and specifications may vary from those shown.
Please contact us if you require clarification or individual specifications of any equipment. Morclean reserve the right to update and amend the specification of our equipment and accessories without notice and in the interest of the customer.
Images or specifications must not be reproduced with express written consent from Morclean Ltd.
Any prices quoted are subject to VAT @ SR. E &OE
Morclean’s quality administration systems have been assured and approved to the standards and guidelines of BS EN ISO 9000:2015 for the sales, service and hire of industrial cleaning equipment.
Our registration no. is 94/121120 and our standards and guidelines are externally audited by CIS.
ISO 9001 registered
