Compact Modular Wash Bay PRO-S1
1500mm width by 3000mm depth wash area
One modular base section
Three 2.2m walls to minimise overspray.
Safe access via two galvanized anti-slip ramps.
Channels dirty water and debris into a dedicated solids collection tank.
Water savings with WPP10 filtration system
Designed for sustainability – Priced for value
KEY FEATURES
Compact Design
The wash area of the WashPad PRO-S1 measures approximately 1500mm in width and 3000mm in depth, making it suitable for limited spaces.
Accessible Entry
Equipped with two galvanized anti-slip ramps, ensuring safe and easy access for equipment.
Overspray Protection
Features 2200mm high walls on three sides to minimize overspray during the cleaning process.
Efficient Waste Management
The floor pan directs dirty water and solids toward a rear collection tank with three dams that retain solids while allowing water to filter through.
Automated Filtration
Includes a float switch-activated diaphragm pump that transfers water to the WPP10 Filtration Tank, where contaminants are filtered out, and the water is lightly chlorinated for reuse.
ADVANTAGES
Environmental Compliance
The closed-loop system recycles water, preventing contaminated runoff and aiding compliance with environmental regulations.
Cost Saving
Reduces water usage, leading to lower water bills and potential savings on discharge licenses.
Portability and Flexibility
Designed for easy transportation, assembly, and disassembly, with a modular structure that can be tailored to specific applications.
Sustainability
Promotes eco-friendly practices by recycling 100% of the water used in the cleaning process.
The WashPad PRO-S1 Wash Bay is an ideal solution for businesses seeking an efficent, compact, and environmentally responsible system for cleaning small-scale equipment.
WASHPAD PRO-S1: TECHNICAL SPECIFICATIONS |
|
|---|---|
| Wash Area | 1500mm x 3000mm |
| Total Dimensions | 1500mm x 4835mm |
| Filtration Tank Dimensions | 2810mm x 740mm x 990mm(H) |
| Max Load Capacity | 5000Kg |
| Wall Height | 2200mm |
| Total Dry Weight | 860Kg |
| Diaphragm Pump | 0.054kW – 17L/minute |
| Booster Pump | 0.37kW – 5 to 40L/minute |
- Please note that many models described on this website are bespoke, and as such cannot always be accurately depicted.
- All photographs and illustrations displayed on this website are representative of model ranges or a model series only. Individual models and specifications may vary from those shown.
- Please contact us if you require clarification or individual specifications of any equipment. Morclean reserve the right to update and amend the specification of our equipment and accessories without notice and in the interest of the customer.
- Images or specifications must not be reproduced with express written consent from Morclean Ltd.
- Any prices quoted are subject to VAT @ SR. E &OE
Morclean’s quality administration systems have been assured and approved to the standards and guidelines of BS EN ISO 9000:2015 for the sales, service and hire of industrial cleaning equipment.
Our registration no. is 94/121120 and our standards and guidelines are externally audited by CIS.
