Morclean Aqua HC 35/50/75 Water Recycling System

The Morclean Aqua HC 35/50/75 is a vehicle wash water recycling system which can work with moving gantry or conveyor washes that use hot and cold wax, shampoo and rinse aid. The system is fabricated in stainless steel grade 304 and the unit is also available with a weatherproof canopy for external siting with heaters for frost protection.

These water recycling systems are ideal for when the water supply is restricted and there is no drainage available on site, then this system can be beneficial for example in a car park. Environmental agencies and water companies are becoming particularly concerned with the quality of effluent discharge consent limits.  Where there is no drainage available our Water Recycling System can permit the installation of vehicle washing installations as all the water is recycled.

The Water Recycling System can be used in conjunction with most Morclean Systems including Screen Wash Systems, Gantry Wash Systems, and Wheel Wash Systems. Morclean would be pleased to liaise with end users, Design or Consulting Engineers, and Civil Engineers with any project

Water Recycling Systems, Car Wash

Spotless Rinse

The Aqua Water Recycling Systems are available with a reverse osmosis system and its inclusion is strongly recommended to improve the wash quality. The drying action of the car wash can be greatly improved by the use of the spot-free facility. Customer satisfaction can be increased dramatically by using a better quality wash, there is also the opportunity to increase your income.

Water Recycling Systems

The Morclean Aqua HD30 Water Recycling Systems can offer the below benefits to the user:

  • Continue washing during water shortages
  • Which protects site income and car wash
  • And increases water cost reduction
  • Reducing water consumption and pollution helps the environment
  • The spotless rinse system reduces spotting and streaking
  • Water storage tanks included
  • 20mm water supply is no problem

 

Water Recycling Systems

Water Recycling Systems

Technical Specifications

Morclean Aqua HC 35

Flow Rate: 160 LPM/35 GPM
Tank Capacity: 1475 litres/328 gallons
Weight (Empty): 700kg
Weight (Full): 2500kg
Suction Line Lenght: 20 Metres
O/A Dimensions: 2400 x 1200 x 1500

Technical Specifications

Morclean Aqua HC 50

Flow Rate: 230 LPM/50 GPM
Tank Capacity: 1475 litres/328 gallons
Weight (Empty): 800kg
Weight (Full): 2600kg
Suction Line Lenght: 30 Metres
O/A Dimensions: 2400 x 1200 x 1500

Technical Specifications

Morclean Aqua HC 75

Flow Rate: 345 LPM/75 GPM
Tank Capacity: 2200 litres/492 gallons
Weight (Empty): 1200kg
Weight (Full): 3900kg
Suction Line Lenght: 30 Metres
O/A Dimensions: 3600 x 1200 x 1500

Water that is used during the vehicle washing and rinsing cycles is gathered in the below ground collection tank. Absorbent cellulose pads, which are located in the settlement tank, remove the oil present during vehicle washing operations. Floating coarse debris is trapped and settlement of grit and coarse sandy material also occurs in the settlement tank.

They are charged at a nominal 6v DC. The aluminum anodes, which are sacrificial, produce aluminum ions which breakdown and remove wax, hydrocarbons, detergent and other oils. This is then floated back to the sump tank using the air-flotation. The equipment should be operated in conjunction with a purpose built collection/interceptor tank.

The water rinse is provided by passing water through an extremely fine membrane which allows very little dissolved solids to pass. This gives virtually pure water compared with the average mains water of 400 mg/l dissolved solids, this is poor quality for vehicle washing.

A water softener can be supplied if required.

Got a question? Email us at info@morclean.com

Click to download PDF – Morclean Aqua HC35,50,75