Can you clean a car with just one litre of water?
How long does it take to wash a typical car using the VapourSteam350X?
It takes one operator about 10 minutes to clean a moderately dirty, average saloon car.
How much water is used per car wash?
On average, the VapourSteam350X consumes 6 Ltrs per hour of water to clean a moderately dirty car, we estimate at 10 minutes washing time just 1 litre of water will be used.
Does the VapourSteam350X dull the paint or take away any shine from the vehicle's surface?
The VapourSteam350X will effectively loosen more surface contaminants faster and gentler than a high volume, cold water pressure washer and use less detergents.
Can I clean vehicle interiors with the VapourSteam350X?
The VapourSteam350X can easily clean the interiors of a car. You can steam clean vinyl and upholstery while removing stains and odours in less time than a cold water carpet extractor. Using steam, interiors are dry within seconds using less water than other methods.
How well does steam remove brake dust from wheels?
The VapourSteam350X easily removes brake dust and for faster results we recommend applying a degreaser prior to cleaning with steam.
Can steam be used on leather interiors?
The VapourSteam350X works well on leather by lifting dirt that has settled into the leather's cracks and crevices.
How many cloths are used during the car wash process?
It takes roughly 4-6 microfibre cleaning cloths to clean a vehicle but you can reduce the amount of microfibers used per car wash by folding the cloth into halves.
How much fuel does the VapourSteam350X consume?
The VapourSteam350X consumes 3 litres per hour, but only if the burner is continuously on.
Can I adjust the water content in the steam?
The VapourSteam350X has an additional water valve adding water into the output of steam. The operator may require more water in the steam in order to clean heavily soiled portions of a vehicle, such as wheels or wheel arches, while interior cleaning should be carried out at the minimum level.
How many wash guns will the VapourSteam350X operate?
The VapourSteam350X and B operates 1 spray gun.
What is the difference between the VapourSteam350X and the VapourSteam350B?
The VapourSteam350X is powered by electricity and a diesel burner while the VapourSteam350B uses a battery with a diesel burner so no mains power is required, the 350B is re-charged before use.
Can the VapourSteam350X or VapourSteam350B operate all day?
The VapourSteam350X is designed to produce continuous steam for all day use, depending on use the 350B will require a periodic re-charge.
What type of water does the VapourSteam350X require?
For most uses, tap water is sufficient.
Does Morclean offer a machine powered by LPG?
Morclean does not presently offer VapourSteam350X machines powered by LPG in the UK.
What if I have technical questions?
Morclean provides lifetime technical support to all customers, please see our contact us pages.
Can the VapourSteam350X produce continuous steam?
The VapourSteam350X produces continuous steam pressure and the boiler automatically adjusts its output to maintain continuous pressure if water is added to the steam stage.
Can the VapourSteam350X use other fuel sources?
In addition to diesel, the VapourSteam350X can operate effectively using kerosene or biodiesel.
Is the VapourSteam350X noisy?
The VapourSteam350X is very quiet. The noise produced by the VapourSteam350X is less than that of an equivalent hot water pressure washer or traditional steam cleaner.
Does the VapourSteam350X produce a lot of exhaust?
The VapourSteam350X burner automatically ignites to maintain operating pressure reducing exhaust and fuel consumption.
Does the VapourSteam350X require oil?
The VapourSteam350X do not have pumps or engines nor do they require any oil for lubrication.
Can washing a vehicle with steam vapour and microfibers scratch the surface?
When used correctly, using steam and microfiber cloths will not create scratches. Vapour steam quickly loosens traffic film and grime and an operator follows the steam trail with a microfiber towel. Dirt is gently transferred from the vehicle's surface onto the microfiber cloth.
Are there any parts of the vehicle to avoid cleaning with steam?
We advise not use the VapourSteam350Xon radios, speakers, dashboards or on exposed electrical components.
Will high heat damage the vehicle's surface?
When steam cleaning a vehicle using the VapourSteam350X, the tip of the spray gun is held 4-6 inches away from the surface of the vehicle. At this distance the steam cools very quickly and the temperature is much lower and so will not cause damage to the vehicle's surface.
Will steam remove wax from a vehicle's surface?
The steam cools quickly and doesn't maintain contact with the surface for very long, as above, but if you need to remove wax simply hold the spray over a particular surface until the wax is removed.
Will steam remove decals from a vehicle's surface?
The steam cools quickly when used a distance away, as above, but to remove decals simply hold the spray over a particular surface until the decal's glue loosens and the decal can be gently removed.
Is the VapourSteam350X safe to use?
The VapourSteam350X Steamer has safety features that protect both the operator and the machine. Steam cools quickly meaning the operator is safe. Features include pressure and temperature control switches, water and fuel level sensors, pressure release valve, non-return check valves etc.
Please note
Product launch 1st Jan 2011, all information is preliminary at this stage and subject to change without prior notice. All information correct at the time of writing but due to continual development of this product (especially with regards to new models) any specification is subject to change. The information contained on this web site should not be considered as a final document to be saved nor is deemed to be valid for future reference. All info, images, specification and detail is subject to change as the product is tested prior to launch
| [ Morclean Home Page | Special Offers | Latest News | Contact Us ] | |
|
|
Freephone 0800 1300 402 For export enquiries contact export@morclean.com If you have any comments about this site contact office@morclean.com |
![]() Morclean is an ISO 9001 registered firm and our quality administration systems have been assured and approved to the standards and guidelines of BS EN ISO 9000:2000 for the sales, service and hire of industrial cleaning equipment. Our registration no. is 94/121120 and our standards and guidelines are externally audited by CIS. Please note that many models described on this website are bespoke, and as such cannot always be accurately depicted. All photographs and illustrations displayed on this website are representative of model ranges or a model series only. Individual models and specifications may vary from those shown. Please contact us if you require clarification or individual specifications of any equipment. Morclean reserve the right to update and amend the specification of our equipment and accessories without notice and in the interest of the customer. Images or specifications must not be reproduced with express written consent from Morclean Ltd. Any prices quoted are subject to VAT @ SR. E&OE ©1997 - 2012 |
|