Stationary Hot Water High Pressure Cleaners
Stationary High Pressure Systems
Typical High Pressure Cleaners - Problems
Traditional high pressure cleaners are often mobile units, and need to be plugged in and connected to services each time the operators needs to use it. The operator then has access to settings including the detergent flow, temperature and pressure, and likely to abuse at least the amount of detergent used.
Common operator problems also include filling with contaminated fuel, or filling the wrong tanks. Furthermore, and from a health and safety point of view, the incoming mains flex can be laid in water, or the outgoing high pressure hoses trail across the floor.
Problem Summary
- Daily connection to services
- Operator access to settings detergent abuse
- Potential of theft
- Contamination of fuel
- Trailing hoses and cables
Features of a Morclean cabinet mounted static system
The unit is housed in a strong steel lockable container, and a permanent connection is made to mains power and water services, and a direct connection to a provided self bunded fuel tank The controls for temperature, flow, pressure, detergent amount are all contained inside the cabinet.
The cabinet is then placed within the provided building, and a remote switch fitted to allow the operator to switch on, and the unit automatically switches off. A preset amount of detergent is added simply by changing the wash lance and there is no need for the operator to attempt any alterations to the settings, or to need to fill the machine with detergent or fuel.
Features Summary
- Direct connection to mains services fuel and detergent
- No operator access to settings
- Preset controls locked inside cabinet
- Auto off and remote switching
- Protection against operator abuse
Benefits
The client is provided with a trouble free system, providing the required wash down facilities without allowing the operator to access settings or tamper with supplies. We eliminate breakdowns caused by operator abuse, and reduce the clients downtime and inconvenience when a unit is out of commission.
Because the unit is place inside a locked cabinet, fixed to the floor, and then within a building, the potential of theft or vandalism is evidently almost eliminated. The steel cabinet is also frost protected to prevent damage to the unit's components.
Benefits Summary
- Eliminate operator abuse and breakdowns
- Trouble free use
- Reduce downtime and inconvenience
- Theft or vandalism protection
- Protection against frost
All you have to do is contact us:
We will provide
- Free advice or a site survey
- Position and design of the equipment
- Provide an all inclusive quotation to design and install
- UK delivery, installation, commissioning and training
- Arrange warranty, servicing and maintenance
So how much does it cost?
A Morclean static can cost about the same as an equivalent standard mobile machine and because of its reliability the machine is available on contract hire (as well as our popular 0% Interest Free Credit*).
Basic Models
Hot water static, robust lockable steel cabinet available in manual or auto stop. All static models built to specification.
| Model | Standard Pressure (psi) | Voltage |
|---|---|---|
| 1500H 1500HA 1500SSH* 1500SSHA* |
1500 | 240 110 |
| 2200H 2200HA 2200SS/H* 2200SS/HA* |
2200 | 415 |
| 2500H 2500HA 2500SS/H* 2500SS/HA* |
2500 | 415 |
| 3000H 3000HA 3000SS/H* 3000SS/HA* |
3000 | 415 |
| *Stainless steel version complete with 2 years Warranty. | ||
A guide to "build to specification" Options - for static hot water models
Also available as a Morclean Special Build unit where we can manufacture bespoke models for demanding applications, water supplies or conditions.
Typical installations include de-mineralised water or de-ionised water, and salt water applications. Cabinets can be built for off-shore and oil platform areas where Zone 1 components are essential. The Morclean range of high pressure hot water cleaners are often used in industrial sites, plant, transport, agriculture, off-shore, oil, shipping and the food industry.
Static hot water high pressure cleaners can also be built as an all electric version without a fuel system in for use in volatile or explosive environments.
| Option | Feature |
|---|---|
| Time Out | Machine automatically cuts out after a pre-determined period of time. Allows operator to perform tasks within the timed period. |
| Auto Stop | The machine automatically switches off directly after use. |
| Frost Protection | Lining of the cabinet to protect against frost in mild frost conditions. |
| Frost Stat | Thermostat and heater that automatically switches on in frost conditions, to protect the unit in harsher frost conditions. |
| Auto Chemical | The detergent system can be automatically operated by either token operation, changing lances, or reducing the working pressure. |
| Auto Foam | Addition of air into a special detergent to produce a foam for longer contact time and to reduce detergent waste. |
| Satellite Switching | A remote box fitted away from the unit, and usually closer to the working area. |
| Integral Fuel Tank | An internally fitted fuel tank where a supply of fuel is not available. |
| Restricted Switching | Settings for pressure, detergent amount, temperature etc are fitted and locked inside the cabinet, allowing operators only basic pre-set options. |
| Coin Operation | Coins or tokens used to operate the machine, to allow monitoring or charging out of running costs. |
| Key Pad | Numerical key pads so operators need pin numbers to operate the machine, selective usage of features, and to allow monitoring of usage. |
| Swipe Start | A swipe card is required to allow operator usage. |
| Colour Code | Colour coded lances that give the operator different settings of pressure or detergent etc and allows restriction of operator usage. |
| Services Connection | Direct connection to mains power, water and services to prevent operator abuse. |
| Exhaust Connection | Fitting of an exhaust flue to vent any fume from the unit inside buildings where there is a requirement to do so. |
Above models are listed as a guide only. Morclean may alter specification without prior notice. Listed models do not guarantee availability or supply. E&OE
*Finance subject to status,completed proposal and terms and conditions. Morclean is a Licensed Credit Broker. Written details available on request, Morclean may use third party finance to assist in any provision.
| [ Morclean Home Page | Special Offers | Latest News | Contact Us ] | |
|
|
Freephone 0800 1300 402 For export enquiries contact export@morclean.com If you have any comments about this site contact office@morclean.com |
 Morclean is an ISO 9001 registered firm and our quality administration systems have been assured and approved to the standards and guidelines of BS EN ISO 9000:2000 for the sales, service and hire of industrial cleaning equipment. Our registration no. is 94/121120 and our standards and guidelines are externally audited by CIS. Please note that many models described on this website are bespoke, and as such cannot always be accurately depicted. All photographs and illustrations displayed on this website are representative of model ranges or a model series only. Individual models and specifications may vary from those shown. Please contact us if you require clarification or individual specifications of any equipment. Morclean reserve the right to update and amend the specification of our equipment and accessories without notice and in the interest of the customer. Images or specifications must not be reproduced with express written consent from Morclean Ltd. Any prices quoted are subject to VAT @ SR. E&OE ©1997 - 2009 |
|
