Water Recycling Equipment
Water Reclaim
If recycling water is an issue have you considered our new VapourSteam low water volume steam cleaners?
Using a minimum amount of water means that a standard saloon car can be steam cleaned with around just one glass of water, reducing the levels of contaminated water run off.
Water Reclaim System: Features
The Morclean Screen Wash System units are typically a 'combined reclaim system'. The system can typically be used in conjunction with commercial or forecourt brush and jet wash machines, or in conjunction with a Morclean Screen Wash System, Gantry Wash System or Wheel Wash System unit. The plant generally consists of stainless steel tanks mounted to a common base plate.
Water Reclaim System: Technical
The plant utilises either hydrocyclone solids separation, electroflocculation, activated carbon filtration or spotless rinse. Fabrication is in stainless steel grade 304D and is available fully enclosed with frost protection.
Water Recycling System: Advantages
The system combines all of the benefits of a full or partial reclaim with an above ground 3 stage interceptor, all incorporated in a single stainless steel module.
Water Reclaim System: Operation
Water used during vehicle washing etc is typically collected in either a sump or is collected via a pump out of the silt trap. This water is then pumped into stage one of the system and three stages of settlement. Afterwards the water is then 'Hydrocycloned' to remove finer solids and is now partially ready for recycling. This water can then also be 'electroflocculated' to break down waxes etc (when full reclaim water is required)
Finally water is filtered through activated carbon to remove residual organics such as shampoo etc prior to recycle as rinse water, and pumped back into the system for use.
Water Recycling System: Options
The Water Recycling System can be used in conjunction with most Morclean Systems including Screen Wash Systems, Gantry Wash Systems and Wheel Wash Systems. Morclean would be pleased to liaise with end users, Design or Consulting Engineers, and Civil Engineers with any project
MORCLEAN WATER TECHNOLOGY - INNOVATIVE Inflatable Wash Pad
The mobile fluid-tight floor was developed by Morclean in conjunction with a European manufacturer in response to market demand, resulting from environmental legislation and regulations.
When a business or company currently produces wastewater in one way or another, it has to be contained and possibly purified or removed. Companies with this responsibility include garages, transport companies, valeting companies, car washing or mobile car wash outlets when washing vehicles, marinas and boatyards when hosing down and cleaning boats, dredging companies when collecting and purifying sludge etc. the fire brigade when collecting large quantities of contaminated drain water, and cattle breeders when collecting water during cleaning and disinfecting of vehicles.
A summary of the advantages of the floor: The wash pad is mobile, flexible and fast to set up. The standard inflatable wash pad weighs only 1Kg per square metre and can be easily transported. They are durable, chemical-resistant and can be manufactured on a bespoke basis in various materials. Many applications are possible especially as the wash pad can be custom made.
| [ Morclean Home Page | Special Offers | Latest News | Contact Us ] | |||||
|
|
Freephone 0800 1300 402 For export enquiries: export@morclean.com If you have any comments about this site contact office@morclean.com |
Morclean (West Midlands) |
|
||
 Morclean is an ISO 9001 registered firm and our quality administration systems have been assured and approved to the standards and guidelines of BS EN ISO 9000:2000 for the sales, service and hire of industrial cleaning equipment. Our registration no. is 94/121120 and our standards and guidelines are externally audited by CIS. Please note that many models described on this website are bespoke, and as such cannot always be accurately depicted. All photographs and illustrations displayed on this website are representative of model ranges or a model series only. Individual models and specifications may vary from those shown. Please contact us if you require clarification or individual specifications of any equipment. Morclean reserve the right to update and amend the specification of our equipment and accessories without notice and in the interest of the customer. Images or specifications must not be reproduced with express written consent from Morclean Ltd. Any prices quoted are subject to VAT @ SR. E&OE Registered in England No. 4605133 |
|||||
